nke Best ngwa ngwa nnyefe Pp oghere mpempe akwụkwọ Extrusion Machine / coroplast Borad Production Line Manufacturer and Factory |Hegu

Ngwa nnyefe ngwa ngwa Pp Hollow Sheet Extrusion Machine / Coroplast Borad Production Line

Ngwa nnyefe ngwa ngwa Pp Hollow Sheet Extrusion Machine / Coroplast Borad Production Line egosipụtara onyonyo
  • Ngwa nnyefe ngwa ngwa Pp Hollow Sheet Extrusion Machine / Coroplast Borad Production Line

Nkọwa dị mkpirikpi:

Anyị na-ewere "ndị ahịa-enyi na enyi, ịdịmma-gbakwasara, mwekota, ọhụrụ" dị ka ebumnobi."Eziokwu na ịkwụwa aka ọtọ" bụ nchịkwa anyị dị mma maka nnyefe ngwa ngwa Pp Ho ...


  • Ọnụ ego FOB:US $20,000-100,000/set
  • Ọnụ ọgụgụ nke Min.1 set
  • Ikike inye:10 tent kwa ọnwa
  • Port:Qingdao
  • Usoro ịkwụ ụgwọ:L/C,D/A,D/P,T/T
    • Budata dị ka PDF

    Nkọwa ngwaahịa

    Ọrụ na nkwado

    Ajuju na kọntaktị

    Mkpado ngwaahịa

    Anyị na-ewere "ndị ahịa-enyi na enyi, ịdịmma-gbakwasara, mwekota, ọhụrụ" dị ka ebumnobi."Eziokwu na eziokwu" bụ nchịkwa anyị dị mma maka nnyefe ngwa ngwaIgwe Nwepu mpempe akwụkwọ PP/coroplast Borad Production Line, Anyị nwere ngwaahịa anọ na-eduga.A na-ere ngwaahịa anyị kacha mma ọ bụghị naanị n'ahịa ndị China, mana a na-anabatakwa ya na ahịa mba ụwa.
    Anyị na-ewere "ndị ahịa-enyi na enyi, ịdịmma-gbakwasara, mwekota, ọhụrụ" dị ka ebumnobi."Eziokwu na eziokwu" bụ ọchịchị anyị kacha mma makaMpempe akwụkwọ mpempe akwụkwọ nke corrugated, Line Production Board PP Coroplast, Igwe Nwepu mpempe akwụkwọ PP, Anyị nwetara ISO9001 nke na-enye ntọala siri ike maka mmepe anyị n'ihu.Na-aga n'ihu na "Ego dị elu, nnyefe ngwa ngwa, ọnụahịa asọmpi", anyị eguzobela nkwado ogologo oge na ndị ahịa si ma esenidụt na nke ụlọ ma nweta nkọwa ndị ahịa ọhụrụ na nke ochie.Ọ bụ nnukwu ihe ùgwù anyị imezu ihe ị chọrọ.Anyị na-atụ anya nlebara anya gị nke ọma.

    Nkọwa ngwaahịa:

    Ngwaahịa Ngwa na elu na-agba plastic extruder PVC electric conduit eme igwe

    SJPGZ usoro plastic extruder PVC abụọ ọkpọkọ extrusion eme igwe na-eji maka n'ichepụta PVC ọkpọkọ dị iche iche diameters na ọkpụrụkpụ ranges nke na-tumadi etinyere na ugbo na ewu mmiri na ọgwụgwọ drainage, n'elu ma ọ bụ n'okpuruala wires na cables.N'ihi njirimara pụrụ iche nke ọkpọkọ PVC plastik, a na-eji ya n'ọtụtụ ebe n'ọhịa nke njem mmanụ crude, ụlọ ọrụ kemịkalụ nke chọrọ nguzogide okpomọkụ dị elu na nguzogide corrosion, mmiri na-ekpo ọkụ na nke dị nro, usoro drainage, na injinia obodo na-arụ ọrụ dị ka ọkpọkọ eli ozu. elu na extra elu voltaji ọkụ eletrik, nchebe aka uwe na na.

    Isi atụmatụ na plastic extruder PVC eletrik conduit eme igwe

    Nke a mmepụta ahịrị mejupụtara conical yiri ejima ịghasa extruder, agụụ sizing ikpo okwu, traktọ, ọnwụ igwe, stacker, wdg.

    1) conical yiri ejima-skru extruder na traktọ nakweere njikwa ugboro AC na England Eurotherm DC na-achịkwa ọsọ ọsọ.Mgbapu mgbapụta na traktọ na-anabata ngwaahịa dị elu.

    2) Enwere ike kewaa traktọ n'ime pedrail elu na ala, okpukpu atọ, mkpịsị anọ, mkpịsị isii, wdg N'ihe gbasara ọkpụrụkpụ na dayameta nke ọkpọkọ.Arụmọrụ nke mmepụta akara bụ nke a pụrụ ịdabere na ya na mmepụta dị elu.

    3) Dị ka dị iche iche chọrọ nke ndị ahịa, ụlọ ọrụ ga-akwadebe extrusion ahịrị na kpọmkwem ngwaọrụ na-etolite ọkpọkọ mmepụta ahịrị nke n'ime-mgbidi gburugburu ọkpọkọ, n'ime oghere mgbidi ọkpọkọ na n'ime oyi akwa ụfụfụ ọkpọkọ.

    Nlereanya
    SJPGZ-50
    Onye na-apụ apụ
    SJSZ-65/132
    Dayameta (mm)
    16-50mm
    mmepụta ọkpọkọ
    Ugboro abụọ pvc ọkpọkọ extrusion pụọ
    Ike(kg/h)
    120-150kg / h
    Ike arụnyere (kw)
    65kw
    Ọsọ nkwụsị (m/h)
    10-30m / h

    Foto igwe

    1, SJSZ51/105 Main extruder: conical abụọ ịghasa

    PVC abụọ ọkpọkọ igwe- extruder

    2, anwụ isi maka PVC electric conduit eme igwe

    Igwe ọkpọkọ PVC okpukpu abụọ - anwụ na ebu

    3, mmiri tank maka PVC electric conduit eme igwe

    Igwe ọkpọkọ PVC okpukpu abụọ- tank jụrụ oyi

    4, bupụ maka igwe eletriki eletrik PVC

    Igwe ọkpọkọ PVC okpukpu abụọ - gbapụ

    5, cutter maka PVC electric conduit eme igwe

    PVC okpukpu abụọ igwe- cutter

    6, stakcer maka PVC electric conduit eme igwe

    PVC ọkpọkọ okpukpu abụọ-stacker

  • Nke gara aga:
  • Osote:

    • 1, OKWU AKA AKA: 

    1.1 OGE KWERE:Ọnwa iri na abụọ, malite n'ụbọchị mbụ nke igwe eji agba ọsọ n'ụlọ nkwakọba ihe ndị ahịa.

    1.2 Onye na-ere ahịa ga-enye: Ọrụ na akụkụ mapụtara,IHE NDỊ MMADỤ NA-ECHICHE N'AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊA nile.

    1.3 OKWU NDỊ MMADỤ:Onye na-ere ahịa kwesịrị inye ọrụ ndụ maka ngwongwo erere, onye na-azụ ahịa na-akwụ ụgwọ maka akụkụ mapụtara nke achọrọ ma agwụchaa usoro ikike ọnwa 12.

    2, Ọnọdụ nnyefe:

    2.1 Ọnọdụ Mbupu:Ọdụ ụgbọ mmiri FOB QINGDAO.

    2.2 OGE MAKA:N'ime ụbọchị ọrụ 60 ka ọ nwetasịrị ugwo ugwo, onye na-ere ahịa kwesịrị ịgwa onye zụrụ ahịa ka ọ mee nyocha.ONYE na-ere ahịa kwesịrị ịkwụsị ibu ngwaahịa ma dị njikere maka mbupu n'ime ụbọchị ọrụ iri na ise ka onye na-ere ahịa natara ụgwọ zuru ezu.

    2.3 Nlebaanya nke ibu:ONYE na-ere ahịa kwesịrị ịgwa onye na-azụ ahịa oge na-ebufe ngwa ngwa, onye na-azụ ahịa nwere ike ịhazi maka nlekọta nke ibu.

    3, Nyocha: 

    MGBE igwe ahụ gwụchara, onye na-ere ahịa kwesịrị ịgwa onye na-azụ ahịa ka ọ mee nyocha tupu mbupu, onye na-ere ahịa na-akwado ihe ọma arụ ọrụ nke ihe niile rere ere.Onye na-azụ ahịa kwesịrị ịbịa n'ụlọ ọrụ na-ere ahịa ka ọ rụọ ọrụ nyocha, ma ọ bụ onye na-azụ ahịa nwere ike inyefe akụkụ nke atọ ka ọ bịaruo ụlọ ọrụ na-ere ere ka ọ rụọ ọrụ nyocha ahụ.

    4, Kọmishọna ntinye na akụrụngwa: 

    Ọ BỤRỤRỤ na onye na-azụ ahịa chọrọ, onye na-ere ahịa kwesịrị iziga otu ndị ọkachamara na ụlọ ọrụ na-azụ ahịa maka ntinye na ịnwale ahịrị dum.

    Ọ bụrụ na mmasị ọ bụla maka igwe anyị, biko nweere onwe gị ịkpọtụrụ anyị:

    Email:info@tongsanextruder.com      info@wpcmachinery.com

    Ekwentị: 0086-13953226564
    TEL: 0086-532-82215318

    Adreesị: The West End na South Side nke Yangzhou Road, Jiaozhou City, Qingdao, China

    Ngwaahịa ndị metụtara

    Mkparịta ụka WhatsApp n'ịntanetị!