. Mochini o motle ka ho fetisisa oa PE PP PPR mochini oa lipeipi oa multi layer PPR mochini oa phala Moetsi le Fektheri |Hegu

Mochini oa PE PP PPR mochini oa pipe oa multi layer PPR

Mochini oa PE PP PPR mochini oa liphaephe oa multi layer PPR mochini oa phala Featured Image
  • Mochini oa PE PP PPR mochini oa pipe oa multi layer PPR

Tlhaloso e Khutšoanyane:

Litlhahiso tsa 1.Machine bakeng sa mohala oa tlhahiso ea PP PE PPR: Kopo ea peipi ea pe: Ka mohala oa tlhahiso ea pipe ea PE, o ka ntša boleng bo phahameng ba di ...


  • FOB Theko:US $20,000-100,000/sete
  • Bongata ba Odara:1 sete
  • Matla a Phepelo:10 lihlopha ka khoeli
  • Boema-kepe:Qingdao
  • Melao ea Tefo:L/C,D/A,D/P,T/T
    • Khoasolla joalo ka PDF

    Lintlha tsa Sehlahisoa

    Tshebeletso le tshehetso

    Ho botsa le ho ikopanya

    Li-tag tsa Sehlahisoa

    1.Litlhahiso tsa mochini bakeng sa mohala oa tlhahiso ea pipe ea PP PE PPR:
    Tšebeliso ea peipi ea peipi:
    Ka mohala oa tlhahiso ea liphaephe tsa PE, o ka extrude boleng bo phahameng ba metsi le liphaephe tsa phepelo ea khase ea boleng bo phahameng .Liphaephe tsena tse hlahisoang ke mohala oa rona li na le ho satalla le ho feto-fetoha ha maemo , ho hanyetsa creep deformation ,ho hokahanngoa hantle ha mocheso .Large dismeter HDPE liphaephe li qala ho bapala haholo. karolo ea bohlokoa lits'ebetsong tsa phepelo ea metsi le khase teropong.

    Melemo ea mochini oa mohala oa tlhahiso ea peipi:
    Mohala ona o bokellelitsoe ka lattice kapa hlobo ea spiral, unit e ncha ea calibration le bate ea ho fafatsa e pholileng.Sistimi e tsoetseng pele ea taolo ea PLC le skrine e kholo ea chromatic liquid-crystal e etsa hore ts'ebetso e be bonolo haholoanyane, e be le sebopeho se bonolo sa mochini oa motho.

    2. mefuta e fapaneng ea mohala oa tlhahiso ea PP PE PPR bakeng sa bophara bo fapaneng:

    Mohlala Diameter(mm) Moetso oa mochini oa ho tšoaea Max.output(kg/h)
    SJ-65B φ110 SJ-25 90-180
    SJ-90B φ200 SJ-30 200-320
    SJ-120B φ400 SJ-30 320-500
    SJ-150B φ630 SJ-30 550-700

    3, Mohala oa mochini o na le mohala oa tlhahiso ea lipeipi tsa PE:
    Mohala oa tlhahiso o na le sistimi ea taolo, extruder, hlobo, calibration unit, haul-off unit, planetary cutter le stacker.

    1, Extruder e ka sehloohong: screw extruder e le 'ngoe

    PP PE PPR mochine oa pipe-extruder

    2, co-extruder: SJ30 extruder bakeng sa ho tšoaea line

    PP PE PPR mochini oa pipe-SJ30 extruder

    3, hlooho ea lefu: boholo bo fapaneng bo ka sebelisa hlooho e fapaneng ea lefu

    PP PE PPR mochine oa phala-shoa hlooho

    4, tanka e pholileng ea vacuum: bolelele ba limithara tse 6

    PP PE PPR mochini oa pipe-tanka ea metsi

    5, ho fafatsa tanka ea metsi: bolelele ba limithara tse 6, bakeng sa bophara bo boholo, re ka hloka ho hlomella li-sete tse 2 kapa li-3 tsa tanka ea metsi a fafatsang.

    PP PE PPR mochini oa lipeipi- tanka e pholileng

    6, mochini oa ho hula: bakeng sa bophara bo fapaneng, re ka hlomella mefuta e fapaneng ea mochini oa ho hula, joalo ka mofuta oa popane, mefuta e meraro ea popane, mefuta e mene ea popane.

    Mochini oa PP PE PPR oa ho hula mochini oa phala

    7, mochini oa ho itšeha: mochini oa ho itšeha oa boleng bo holimo bakeng sa ho seha ho se nang lerōle

    Mochini oa peipi ea PE (25)

    8. sehlahisoa sa stacker: bolelele ba limithara tse 6

    PP PE PPR mochine oa phala-stacker

  • E fetileng:
  • E 'ngoe:

    • 1, MELAO EA TIISETSO: 

    1.1 TIISETSO NAKO:LIKHOELI 12, HO TLOHA LETSATSI LA PELE LA MECHINA E SEBELISANG LEBOLONG LA BATHO BA BATHO.

    1.2 MOREKISI O TLA FANA: LITŠEBELETSO LE LIKAROLO TSE SEKETSENG,TŠEBELETSO EA MAHALA KA NAKO EOHLE EA TIISETSO EA LIHLOOHO.

    1.3 TŠEBELETSO EA BOPHELO:MOREKISI O LOKELA HO FANA KA TŠEBELETSO EA BOPHELO BA NAKO EA BOPHELO BA LITHO TSE REKIsitsoeng, MOREKI A LEFA LIKAROLO TSE HLOKANG KA MOR'A MELAO EA TIISETSO EA LIKHOELI 12.

    2, MAEMO A HO PHELA:

    2.1 BOEMO BA HO PHELA:FOB QINGDAO KOU.

    2.2 NAKO EA HO FIHLELA:KA MATSATSI A 60 A HO SEBETSA KA MOR'A HO FUMANA TEFO E TSOHLE, MOREKISI O LOKELA HO TSEBISA MOREKI HORE A ETSE HLAHLOBO.MOREKISI O TSHWANETSE HO QETELA HO PAKA LITHO LE HO LOKELA HO THUSOA KA MATSATSI A 15 A HO SEBETSA KA MOR'A MOR'A MOREKISI A AMOHILE TEFO E FELETSENG.

    2.3 TSAMAISO EA HO LOADING:MOREKI O TSHWANETSE HO TSEBISA MOREKI KA NAKO E LEBANG HO LAOA KA NAKO, MOREKI A KA HLOKELA HO HLOKOMELA HO LAOLWA.

    3, HLAHLOBO: 

    HA MOCHINTŠI O QETILE, MOREKI O LOKELA HO TSEBISA MOREKI HO ETSA TLHAHLOBO PELE HO THUSOA, MOTHEKI O HLOMELA MOSEBETSI OA MOLEMO OA LITHO TSOHLE tse rekisitsoeng.MOREKISI O FIHLELA LITEHELO TSA TLHOKOMELISO BAKENG SA TLHOKOMELISO EA MACHINE.MOREKI O TLA TLA FEDKENG YA MOREKI HO TLA ETSA MOSEBETSI OA HLAHLOBO, KAPA MOREKI A KA ABELA KAROLO EFE EFE EA BORARO HO TLA FKKENG EA MORETSI HO TLA ETSA MOSEBETSI OA HLAHLOBO.

    4, KOMISI EA HO KENYA LE LISEBETSI: 

    HAEBA MOREKI A HLOKA, MOREKI O TSHWANETSE HO ROMELA THIMI YA TECHNICIAN FACTORY YA MORKI HO KENYA LE HO LEKOLA MORA OHLE.

    Haeba ho na le thahasello ho mechini ea rona, ka kopo ikutloe u lokolohile ho ikopanya le rona:

    Lengolo-tsoibila:info@tongsanextruder.com      info@wpcmachinery.com

    Mohala: 0086-13953226564
    TEL:0086-532-82215318

    Aterese: The West End le South Side Of Yangzhou Road, Jiaozhou City, Qingdao, China

    LIHLAHISO TSE HLAHANG

    Moqoqo oa Marang-rang oa WhatsApp!